Introduction
Every product that will be exported will need to have a clear identity. As the scanner at the shop will have no knowledge of the product, having the right Barcode for Export is very important for exporters. The two main Barcodes are UPC and EAN. This guide will explain what they are and how to choose the right one.
What Is a UPC Barcode?
UPC stands for Universal Product Code. It contains 12 digits and is commonly used in North America. This tag employs a GTIN-12 to identify the goods. This is commonly used in grocery, electronics, and household items sold through large chains. In order to minimize scanning mistakes, the last digit is a check digit.
What Is an EAN Barcode?
EAN stands for European Article Number, but is commonly known as International Article Number. The most common barcode is EAN 13. This contains 13 digits and is commonly used in retail throughout most of the world. This tag will employ a GTIN-13 to identify the items. This is a helpful link between the two. Adding a 0 in front of a UPC will create a valid EAN-13. Many exporters search for the Barcode for Export without knowing that the two overlap.
UPC vs EAN: What Are the Main Differences?
The table sets the key points side by side.
| Factor | UPC Barcode | EAN 13 |
|---|---|---|
| Digit count | 12 | 13 |
| Common association | North American retail | International retail |
| Product identification | GTIN 12 | GTIN 13 |
Both are part of the GS1 identification system. Choosing the right one depends on the retailer, market, and the rules of the country it will be going to.
Which Barcode Should Exporters Choose?
There are three factors that will help you decide which one to choose. Firstly, the market it will be going to. If you are exporting spices to Toronto and Berlin, the chain in Toronto may require a UPC Barcode. However, the buyer in Berlin may expect an EAN 13. Most modern scanners will read both; however, the buyer will have their own rules. Some online marketplaces may specify which one they want. The best place to start is by asking the importer or retailer.
Common Barcode Mistakes to Avoid When Exporting
There are three main errors. Firstly, some exporters use a number that has not been verified. Numbers should be obtained through the official GS1 method. If you obtain one from a random seller, it may have already been taken. Secondly, using the same identifier for different products. Every size, flavour, and pack will need its own number. Lastly, not following the rules for the country it will be going to. A quick scan of a sample with the buyer will help to avoid expensive relabelling. Once the labels have been printed, it can be difficult to change them.
Conclusion
A UPC is a 12-digit barcode suitable for North America. A 13-digit barcode that may be used widely is dubbed an EAN-13. Both are part of the same system, so the main thing to consider is which one your buyer will need. By confirming early on what they need, you can choose a suitable Barcode for Export for your target market. This will reduce any surprises at the border and make the shelves run smoothly. A little research now will save you a lot of work later.

